- 兰鹏，张家泉. 灰口铸铁低频热疲劳载荷下的微观组织与拉伸性能[J]. 材料热处理学报, 2014, 34(4):149..
- 兰鹏，张家泉. 钢锭模用灰口铸铁服役工况下组织与力学行为研究[J]. 机械工程学报, 2014, 50(2):116..
- 兰鹏，张家泉. 微观组织参数及工艺条件对430不锈钢凝固显微结构的影响[J]. 北京科技大学学报，2014, 36(4): 446..
- 兰鹏，张家泉. 430不锈钢凝固显微组织模拟的3D CAFE模型[J]. 北京科技大学学报，2014, 36(3): 315..
- 兰鹏, 杜辰伟, 陈培莉, 等. 微合金钢连铸表面横裂纹形成机理与控制技术研究现状[J]. 钢铁研究学报, 2017, 29(1): 1..
- 兰鹏, 唐海燕, 纪元, 等. Fe-22Mn-0.7C TWIP 钢的热塑性与断裂机制[J]. 工程科学学报, 2016, 38(6): 795..
- Lan P, Zhang J. Effect of Mould taper and Wall Thickness on Steel Ingots Soundness by 3-D Solidification Simulation[C]. The Minerals,Metals & Materials Society 2012..
- Lan P, Zhang J. Numerical Analysis of Macrosegregation and Shrinkage Porosity in Large Ingot[J]. Ironmak Steelmak, 2014, 41(8):598..
- Lan P, Zhang J. Analysis of Solidification Microstructure and Hot Ductility of Fe-Mn-C TWIP Steel[J]. Mater Sci Technol, 2014, 30(11):1297..
- Lan P, Zhang J. Strength, microstructure and chemistry of ingot mould grey iron after different cycles of low frequency high temperature loads[J]. Materials & Design, 2014, 54: 112..