曹建国
个人信息Personal Information
教师英文名称:Caojianguo
职称:教授
博士生导师
毕业院校:北京科技大学
学科:机械设计及理论
学历:研究生
学位:博士
所在单位:机械工程学院
电子邮箱:
- Dong Q, Cao J G*, Li H B, Zhou Y S, Yan T L and Wang W Z. Analysis of spalling in roughing mill backup rolls of wide and thin strip hot rolling process. Steel Research International.2015,86(2):129-136.
- Sun Y H,Zhou D B,Bai J,Wang H P and Cao J G. Design and evaluation of a highly stretchable and conductive thin film for tactile sensors.2015 TechConnect World Innovation Conference and Expo, National Harbor, Maryland, U.S.A., June 14-17, 2015..
- Li Y L, Cao J G*,Yang G H,Wen D,Zhou Y Z and Ma H H.ASR bending force mathematical model for the same width strip rolling campaigns in hot rolling. Steel Research International. 2015,86(5):567-575.
- Dong Q,Cao J G* and Wen D.Spalling Prevention and Wear Improvement of rolls in steel strip hot-rolling process.Journal of Failure Analysis and Prevention,2015,15(5):626-632.
- 曹建国*,唐慧,杨光辉,温盾,周云松,赖金权.有高温相变的电工钢热轧起浪的有限元分析, 哈尔滨工业大学学报,2016,48(1):146-151.
- 曹建国*,王天聪,李洪波, QIAO Yu,温盾,周云松.基于Arrhenius改进模型的无取向电工钢高温变形本构关系,机械工程学报,2016,52(4):90-96,102.
- Zhao C,Wang M,Shi Y,Cao J G and Qiao Y.High-temperature post-processing treatment of silica nanofoams of controlled pore sizes and porosities, Materials & Design,2016,90(1):815-819.
- 曹建国.薄板坯连铸连轧工艺与设备.北京:化学工业出版社,2017.1.
- 曹建国*,宋红攀,刘鑫贵,吴毅,江军,项彬.基于ANSYS/FE-SAFE的高速动车组车轴疲劳寿命分析,中国铁道科学,2017,38(1):111-116.
- Yin H B, Zhang X T, Li J F and Cao J G. Grasping Model and Experiment of a Soft Robot Gripper with Variable Stiffness. 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and the 8th IEEE International Conference on Robotics, Automation and Mechatronics (RAM), 19 to 21 November 2017,Ningbo..
- 曹建国*,周建辉,缪存孝,尹海斌,李维奇,夏飞.电子皮肤触觉传感器研究进展与发展趋势,哈尔滨工业大学学报,2017,49(1):1-13.
- 刘晓立,曹建国*,柴雪婷,刘江,程姣姣,赵荣国.基于变弹性模量对DP980高强钢辊弯成型回弹预测精度的研究, 哈尔滨工业大学学报, 2018,50(7):137-143.
- Li Y L, Cao J G*, Qiu L, Yang G H, He A R and Zhou Y Z. Research on ASR work roll contour suitable for all width electrical steel in hot rolling. International Journal of Advanced Manufacturing Technology,2018,95(5):1–6..
- Cao J G*, Chai X T, Li Y L, Kong N, Jia S H, Zeng W. Integrated design of roll contours for strip edge drop and crown control in tandem cold rolling mills. Journal of Materials Processing Technology, 2018,252(2):432-439.