Jiang B, Fang W, Chen R, et al. Mechanical properties and microstructural characterization of medium carbon non-quenched and tempered steel: Microalloying behavior[J]. Materials Science and Engineering: A, 2019, 748: 180-188.

Jiang B, Hu X, Zhou L, et al. Effect of Transformation Temperature on the Ferrite–Bainite Microstructures, Mechanical Properties and the Deformation Behavior in a Hot-Rolled Dual Phase Steel[J]. Metals and Materials International, 2019: 1-9.

Jiang B, Hu X, He G, et al. Microstructural Characterization and Softening Mechanism of Ultra-Low Carbon Steel and the Control Strategy in Compact Strip Production Process[J]. Metals and Materials International, 2019: 1-11.

Jiang B, Fang W, Chen R, et al. Mechanical properties and microstructural characterization of medium carbon non-quenched and tempered steel: Microalloying behavior[J]. Materials Science and Engineering: A, 2019, 748: 180-188.

Jiang B, Wu M, Zhang M, et al. Microstructural characterization, strengthening and toughening mechanisms of a quenched and tempered steel: Effect of heat treatment parameters，Materials Science and Engineering: A，2017，707：306~314.

Jiang B, Wu M, Sun H, et al. Prediction model of austenite growth and the role of MnS inclusions in non-quenched and tempered steel，Metals and Materials International，2018，24（1）：15-22.

Jiang B, Dong Z, Zhou L, et al. Microstructural Characterization and Hardening Mechanism of Steel for Large Size Bearing Ring Under Fast Heating and Short Soaking Time Condition[J]. Steel Research International, 2016, 87(9): 1127-1136.

Jiang B, Mei Z, Zhou L, et al. High toughness and multiphase microstructure transition product of carburizing steel by a novel heat treatment cooling process[J]. Materials Science and Engineering: A, 2016, 675: 361-370.

Jiang B, Mei Z, Zhou L, et al. Microstructure evolution, fracture and hardening mechanisms of quenched and tempered steel for large sized bearing rings at elevated quenching temperatures[J]. Metals and Materials International, 2016, 22(4): 572-578.

Jiang B, Dong Z, Yang Z, et al. Analysis of the Formation of Surface Crack on Crankshaft After Die Forging[J]. Transactions of the Indian Institute of Metals, 2015, 68(4): 553-559.