- Lan P, Zhang J. Strength, microstructure and chemistry of ingot mould grey iron after different cycles of low frequency high temperature loads[J]. Materials & Design, 2014, 54: 112..
- Lan P, Zhang J. Study on the mechanical behaviors of grey iron mould by simulation and experiment[J]. Materials & Design, 2014, 53: 822..
- Lan P, Nguyen D A, Lee S Y, et al. Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation[J]. Metals and Materials International, 2017, 23(3): 568..
- Lan P, Zhang J. Analysis of Solidification Microstructure and Hot Ductility of Fe-Mn-C TWIP Steel[J]. Mater Sci Technol, 2014, 30(11):1297..
- Lan P, Zhang J. Thermophysical properties and solidification defects of Fe–22Mn–0.7 C TWIP steel[J]. steel research international, 2016, 87(2): 250..
- Lan P, Zhang J. Numerical Analysis of Macrosegregation and Shrinkage Porosity in Large Ingot[J]. Ironmak Steelmak, 2014, 41(8):598..
- 兰鹏, 唐海燕, 纪元, 等. Fe-22Mn-0.7C TWIP 钢的热塑性与断裂机制[J]. 工程科学学报, 2016, 38(6): 795..
- Lan P, Tang H, Zhang J. Solidification Microstructure, Segregation, and Shrinkage of Fe-Mn-C Twinning-Induced Plasticity Steel by Simulation and Experiment[J]. Metallurgical and Materials Transactions A, 2016, 47(6): 2964..
- Lan P, Zhang J. Effect of Mould taper and Wall Thickness on Steel Ingots Soundness by 3-D Solidification Simulation[C]. The Minerals,Metals & Materials Society 2012..
- Lan P, Zhang J. Twinning and Dynamic Strain Aging Behavior during Tensile Deformation of Fe-Mn-C TWIP Steel[J]. Materials Science and Engineering: A, 2017..