Zhangfei
|
- Professional Title:Associate Research Fellow
Supervisor of Master's Candidates
Alma Mater:University of Science and Technology Beijing
Discipline:Control Theory and Control Engineering
Education Level:研究生
Degree:博士
School/Department:Engineering Research Institute, University of Science and Technology Beijing
E-Mail:
Contact Information
No content
- Paper Publications
- 张飞, 张勇军, 郭强. 轧辊偏心在线辨识补偿算法的研究[C]. 第九届钢铁年会论文集. 北京, 2013-10-23.
- 叶利峰, 王京, 张飞. 基于自抗扰控制的改进Smith-AGC研究[J]. 冶金自动化, 2013, 37(2):40-45.
- 叶利峰, 王京, 张飞. 基于模型补偿的自抗扰控制器研究[J]. 武汉科技大学学报, 2013, 36(2):140-145.
- 何力, 王京, 张飞. 离散跟踪微分器在板形识别上的研究与应用[J]. 钢铁研究学报, 2013, 25（2):58-62.
- 张飞, 侯建新, 杨荃, 郭强, 黄来顺. 中板轧机液压压上AGC系统的多级控制[J]. 电气传动, 2012, 42(2): 73-77.
- Fei Zhang, Lifeng Ye, Wenquan Sun, Xiaohuai Ren. Research of Smith Monitor AGC Based on Active Disturbance Rejection Control[C]. 2nd International Symposium on Advanced Rolling Equipment Technologies, ISARET 2012. Beijing, April, 2012: 49-54.
- 张飞, 杨荃, 胡水平, 陈广秀. 冷连轧实验轧机自动控制系统[J], 实验技术与管理, 2011, 28(2): 72-75.
- Zhang Fei, Guo Qiang, Yu Wei, Liu Huaqiang. Research and Application of Intermediate Cooling Control Scheme for Plate Rolling[C]. 2011 International Conference on Consumer Electronics, Communications and Networks. Xianning, April, 2011: 2451-2454.
- 张飞, 杨荃, 凌智, 殷实, 岳魏敏. 中厚板轧机自动化系统介绍. 冶金设备. 2010, (3): 55-59.
- Fei Zhang, Quan Yang, Nankai Shentu and Futang Que. Research and application of hot rolling monitor AGC algorithm[C]. 2010 international conference on electrical and control engineering, Wuhan, June 2010: 5451-5454.