Yang Peipei, Wen Zhi, Dou Ruifeng*, Chen Yuqin, Double MRT-lattice Boltzmann model for simulating impinging jet flow and heat transfer, International Journal of Heat and Mass Transfer, 2015, (86): 302-308..

豆瑞锋，温治*，董斌，程淑明，冯霄红，李志，基于可行工况集的带钢连续热处理过程优化策略，北京科技大学学报，2012，34(8)：943 ~ 951. (Ruifeng Dou, Zhi Wen*, Bin Dong, Shuming Cheng, Xiaohong Feng, Zhi Li. Optimization strategies of steel strip continuous heat treatment based on feasible sets, Journal of University of Science and Technology Beijing, 2012, 34(8): 943 ~ 951).

豆瑞锋，温治，周钢，刘训良*，冯霄红，罗建枫，水射流冲击冷却过程靶面热流密度测试方法的改进，北京科技大学学报，2013，35(12)：1653 ~ 1658. (Ruifeng Dou, Zhi Wen, Gang Zhou, Xunliang Liu*, Xiaohong Feng, Jianfeng Luo. Improvement of measurement methods for surface heat flux under water jet impinging. Journal of University of Science and Technology Beijing, 2013, 35(12): 1653 ~ 1658).

Xiong Zhang, Zhi Wen, Ruifeng Dou*, Gang Zhou, Zhiqiang Li, Evolution of microstructure and mechanical properties of cold-rolled SUS430 stainless steel during a continuous annealing process, Materials Science and Engineering A, 2014, (598): 22-27..

Xiong Zhang, Zhi Wen, Ruifeng Dou*, Gang Zhou, Fan Zhang, Experimental study of the air-atomized spray cooling of high-temperature metal, Applied Thermal Engineering, 2014, (71): 43-55..

Yang Peipei, Wen Zhi, Dou Ruifeng*, Chen Yuqin, Double MRT-lattice Boltzmann model for simulating impinging jet flow and heat transfer, International Journal of Heat and Mass Transfer, 2015, (86): 302-308..

Ruifeng Dou*, Zhi Wen, Gang Zhou, Xunliang Liu, Xiaohong Feng, Experimental study on heat-transfer characteristics of circular water jet impinging on high-temperature stainless steel plate, Applied Thermal Engineering, 2014, (62): 738-746..

Ruifeng Dou*, Zhi Wen, Gang Zhou, Heat transfer characteristics of water spray impinging on high temperature stainless steel plate with finite thickness, International Journal of Heat and Mass Transfer, 2015, (90): 376-387..

Ruifeng Dou*, Zhi Wen, Gang Zhou, 2D axisymmetric transient inverse heat conduction analysis of air jet impinging on stainless steel plate with finite thickness, Applied Thermal Engineering, 2016, (93): 458-457..

Effects of contact pressure, interface temperature, and surface roughness on thermal contact conductance between stainless steel surfaces under atmosphere condition,.International Journal of Heat and Mass Transfer,